P/T/Z Parameters: 1. Fe-based self-lubricating gears, Locking, wearable, scaffold SPCC steel is good, good flexibility, not easy deformation. 2. Indoor or can be wall-mounted lifting, IP66 dust. 3. Rotation: Level: 0 to 355 degree; Vertical: 0 ~ 90 degree, the smallest level corner: 20 degree. 4. Rotational Speed: 20 degree level. / S; Vertical: 6 degree / S. 5.1 / 3 Sony 420 line (520 lines) CCD (Optional others), 6 MM standard lens. 6.25 m IR. Basic Parameters: Frame rate: PAL: 1-25fps. NTSC: 1-30fps Video codec: H. 264 Audio codec: G. 722 Size: D1: 704*576, HalfD1: 704*288, CIF: 352*288 Video bit rate: 32kbps-3mbps Video stream channel bandwidth: 200kbps(352*288, 25fps per 1ch) Delay time: Less than 200 MSEL(0.20 second) in Lan system Resolution: 704*576(P) 704*480(N) 704*288(P) 704*240(N) 352*288(P) 352*240(N) Image adjust: Brightness, contrast, chroma, saturation, image quality can be adjusted. Output frame rate is 30fps at most and network bandwidth usage is 32kbps at least Interface: RS485 P/T/Z decoder interface, RJ-45 10M/100M Ethernet interface, COM Network Protocol: TCP/IP, UDP, MULTICAST Network transmission mode: ISDN, ADSL, LAN, WAN Built-in Web NV: It fully supports IE monitoring, configuration and updating, so that it is characterized by simple and convenient operation Dynamic IP: Support internet connection assigned with dynamic IP address Video input: 1CH PAL/NTSC composite or digital(ITU-656) Stream type: Single video stream or composite stream Audio input: 1CH line/MIC Audio output: 1CH line, Headphone output(optional) User management supports the three-level password Alarm Alarm detect and action: Alarm input and output can support mobile sensing, Video Lost, date, time, and event trigger. Action: (Relay Output control the peripheral equipment Interface: 1CH alarm input, 1CH alarm output Motion detection: Yes Hardware CPU: ARM+DSP Operate system: Embedded linux system ROM: 8M Bytes Flash ROM RAM: 32M Bytes SDRAM WinDog: Watch the voltage of system Backup: USB1.1 Wireless WLAN(802.11G)(optional) Wireless CDMA(optional) 2CH SWITCH INPUT/OUTPUT(optional) Power supply: DC 12V/1A Power consumption: ≤3Watts PCB Dimension: Φ167mm*138mm*174mm Temperate: Ambient temperature: -35 centigrade degree ~ +65centigrade degree (without temperature control)-50 C - +450 C temperature role of activated Humidity: <90% SDK Network SDK, DEMO software and its source code Optional Product Center management software(ImagineWorldClien) Provide system and paly SDK, the user can do double empold according to demand Supports transfer server and APS Supports DDNS Supports RS232 and RS485 transfer Supports remote-file server, can realize remote Playback and download